How do I pair my BlueParrott Xpressway II, VoxStar, or Xpress headset to my cell phone?
Keep headset and phone no less than 3 inches and no more than 3 feet apart while pairing. Keep other Bluetooth devices at least 50 feet away, or turn them off. NOTE: The headset can be paired with up to 8 different devices but can only be connected to one at a time unless it’s in multipoint mode.
- Start with the headset powered off.
- Hold down the headset’s multi-function button (MFB) until light rapidly flashes blue and you hear the audio prompts “Power On” and then “Discovering.” IMPORTANT: Wait for both audio prompts or the blue, rapidly flashing light. This may take up to 10 seconds. Then release the MFB.
- Put your cellular phone into Bluetooth Search/Scan Mode per the manufacturer’s instructions.
- Wait for the phone to discover your headset. This could take up to 2 minutes. Once the phone discovers the headset, BlueParrott Xpressway II, BlueParrott VoxStar, or BlueParrott Xpress will appear in your phone’s device list. Select the device and select “Pair” on the phone. Enter a pass code of "0000" if instructed. Once pairing is complete the rapid blue light will stop flashing. The phone may prompt you to connect to the headset. Select “Yes” on the phone to connect to the headset. When connected, you will hear the voice prompt, “Your headset is connected,” and the blue light will flash indicating that the headset is in Standby Mode and is ready to make or receive calls.
MULTIPLE DEVICE PAIRING
Once all devices are paired, multipoint connection can be made by turning off the headset and all devices it’s paired with. Turn the two devices you want to connect to back on and then then turn on the headset. The headset will connect to the devices in order of pairing. For instance, if device A, B and C were paired in that order, connection will be established to A first. If A is not available (turned off, out of range), the headset will connect to B, etc.